So my LG L41C is stuck on it's boot animation and because I was not being carefull USB debugging is not enabled. Any way to fix it?

For any tools please note I am using Ubuntu 15.04.

Thank you, but I went through the menu, then it said processing reset (or something similar), then it went back to it's boot animation.

TWRP is installed

To factory reset make sure your booted into TWRP. Then press the wipe button, than slide the factory reset slider. Or you can just select data and wipe that.

There are a few ways to do this.

Method 1:
Turn off your phone and unplug it from your PC.
1. Press and hold "Volume Down" and "Power" at the same time
2. When the LG logo appears, release the "Power" key and then press and hold it again
3. When the "Factory data reset" screen appears, release all hardware buttons
4. Use the "Volume" rocker to select "Yes", and press "Power" to confirm
5. It will now boot into recovery

Method 2:
Plug your phone into you PC. Make sure the LG Mobile Drivers and adb is installed.
1. Open a command window
2. Type adb devices
3. Type adb reboot recovery
4. Let the phone reboot

Those should work for you if your running the UltaLolli ROM or LG G3 ROM 1.1 or later.

Thanks. Where do I get the LG Mobile Drivers for Ubuntu? Also will ADB work if USB debugging is disabled?

There is none but I have a way you can still use adb on Ubuntu. I have done it before. I will post the script you can run to get it working in a hour or so. For now just follow this guide: Its kinda complicated but I am sure you will be able to figure it out.

Oh. Did you try to get in the other way?

Doing

Code: [Select]

adb devices will not include the phone in the list.

I might need to retire the phone (cue funeral music )

You dont need adb to fix it. As I said before there are 2 ways to fix it.

Try this one:
0. Turn off your phone and unplug it from your PC.
1. Press and hold "Volume Down" and "Power" at the same time
2. When the LG logo appears, release the "Power" key and then press and hold it again
3. When the "Factory data reset" screen appears, release all hardware buttons
4. Use the "Volume" rocker to select "Yes", and press "Power" to confirm
5. It will now boot into recovery